I love it when a vision comes to fruition exactly as I saw it in my mind. I completed the 1st floor bathroom medicine cabinet project, a project that began with a vision when I walked past a $15 salvage cabinet door at Building Value over a year ago. The original cabinet was missing the door and shelves, paint was peeling off, I thought it was trash, so it was pitched when we demoed down to the studs. About a month after demo I saw #NicoleCurtis from Rehab Addict restore a cabinet in similar shape and I kicked myself from throwing mine away. So what was I going to do with the approx. 25″ x 25″ framed out square in my bathroom wall.
I was looking for doors when I saw a pair of what was once glass cabinet doors on a built-in. Building Valu really didn’t want to sell just one, but I talked them into it. Instantly, I had the plan in my mind. The cabinet door would be the mirror mounted to barn door track that would slide open to reveal shelves of the medicine cabinet. I saw the ending, now I just had to get there.
The door had the old school wavy glass in it, which I removed and gave to Architectural Art Glass when they installed my restored stain glass window. The first thing I had to do was trim the door down. Hard to tell from picture since I didn’t capture the entire door, but I could tell from where the rollers were inset in the wood the door ran vertical (it’s not a perfect square) instead of horizontal. Due to space limits I needed to go horizontal, so the thicker side had to be cut down to make all sides uniform. I didn’t own a table saw and had never heard of WavePool at that time so my former neighbor cut it down for me. It sat for several months after that first step.
The tile work was finished, I had started taking my shop classes, so now was the time to focus on the medicine cabinet again. Next step was filling the back of the opening, which was the drywall from the guest bedroom. I took a thin piece of MDF board I had leftover from the kitchen remodel project I did, covered it with the motivational peel and stick paper I used on the closet shelves, and used construction adhesive to attach it to the drywall.
I purchased melamine shelf components from Home Depot to create my kitchen and 1st floor bath linen closet shelves. I had a lot of scraps left that I knew would be great pieces to create the frame of the cabinet. I only needed an approx 4″ width, so I knew I’d need to drill holes on one side for the pegs that would hold the shelf. The drill press at the Wood Shop made quick work of that. With the holes drilled I returned home and ripped the four pieces I needed to create the frame. I bought iron on laminate for the exposed edges and proceeded to nail the four pieces together. I don’t have pictures of the finished frame as I managed to shoot about a 1/4″ of a nail into my left flipping finger knuckle. I took a break from the project again until the swelling went down.
The inside frame was not going to be enough. The opening still look unfinished, so the next step was trimming it out. For that I took the new pine I had bought for the built-in, but didn’t use and took it to the Wood Shop and planed it down until it was only about a 1/4″ thick. I then mitered the ends, prime painted it, and nailed it to the box frame. I filled in the nail holes and then painted it Incredible White to match the walls. Big thanks to Scotti at the Wood Shop for giving me a quick tutorial on how to measure appropriately to maintain the 1/4″ reveal I wanted around the frame.
Now back to that cabinet door. First step was getting the original finish off it. For that I used the Wood Shop’s belt sander. I then drilled the holes for the barn door hardware and primed it. I thought I had bought the Tricorn Black (another color from the 2017 HGTV Urban Oasis Giveaway), but I hadn’t so I gave it extra time to dry and turned my focus on the barn door track. Months prior I had purchased a Smart Standard 5ft mini barn door kit from Amazon without measuring or really knowing how these things worked. Well it turns out the length of your rail should be twice the length of your door. I should have ordered a 6 ft length kit, but too much time had passed and I figured it would be close, but workable.
The bigger problem I had was my kit was for hanging a door on furniture. The holes were pre-drilled and not spaced to hit wall studs, which I needed to do. I decided to search Google for tracks that weren’t pre-drilled and I found one on Signature Hardware. That one track was the same price as the entire kit, but I decided to get it as it also allowed me purchase a slightly longer length. I measured for the studs and took the track to the Wood Shop to use their drill press to make the holes.
Hanging the track gave me fits. I used my trusty Walabot (love that gadget) to find the studs and even tested the location. One would assume a stud would run top to bottom. The two locations above the opening did not, which I did not discover until I went to drill in the 4″ lag bolts I bought (I didn’t use the bolts that came with the Smart Standard kit as they would not have been long enough).
Turned out I did not give myself enough clearance for the door to roll without hitting the light fixture, so I had to lower the rail. After patching the four holes I made, I moved it down 1″ and the stud was gone. I patched again lowered it a bit more. Once hung I grabbed the primed door to try it out. The vision was coming to light until I realized the rail stoppers from the kit would not fit on the new rail, it was wider. I needed to figure out something to stop the mirror from rolling off the end. The track had two holes covered with plastic plugs that were made for the powder coat process. I removed one plug, which was in a perfect location and used a leftover spacer from the TV wall mount unit I bought. Perfect solution.
It was down hill from that point. I applied two coats of the black paint, let it dry a couple of days and installed the door pull I found on Build.com. I then took the frame to another local small business in my hood, Southern Ohio Glass, who cut me three glass shelves and filled the frame with a beveled mirror. It was absolutely beautiful and 100% what I envisioned when I walked past the door over a year ago in the salvage store.
The only glitch I had to fix was the door swung because like the stoppers, the door guides that came with the kit would work with my application. Back to Google where I searched for door guides and I found on Amazon exactly what I was looking for, a small wall mount barn door guide. I found the stud, mounted the guide, really showed off, by adding a rubber stopper on the side of door that will hit the wall and with that what was in my mind’s eye was a reality. My guest bathroom decor is a tribute to all the people in my life that shared their positive spirits and words of encouragement on my journey to restore this very special house. This is my coolest upcycle/salvage project to date! All the leftover barn door kit parts will be put to use on my future master bed beverage station.