Merriam-Webster provides these definitions:

1a: the lowest member of a base SUBBASE b: a block upon which the moldings of an architrave or trim are stopped at the bottom 2: a usually square block serving as a basebroadlyany of various bases or lower parts 3: a course of stones forming a continuous foundation or base course

Why am I posing that question? Thanks to CenterBank and their Vice President, Manager, Doug Barnaclo, I’m going to be able to move forward with painting my house!!!! With earnest I’ve been obtaining bids from painters and one asked me what I planned to do with my second floor trio of windows, one located on each side of the house. They are the only windows on the house that have “plinths” and they are in really bad shape or missing entirely.

Stock Street side of my house. 2nd from left plinth is half missing; 3rd is just a chunk of 2×4
Neighbor side of house. 1st from left is a chuck of wood, 2nd I took down and will show later, 3rd half missing

I’m going to work on the neighbor side first as I can reach these from inside my master bedroom. The Stock Street side is the master bath and the two smaller windows don’t open. I have a crappy extension ladder, so I may invest in a new one or at least purchase a ladder stabilizer. I didn’t intend to remove the original completely, but it didn’t put up a fight as clearly the piece was already broken and poorly attached with just caulk. I learned what these were called during a chat with Architectural Depot representative Sam Pease. I found this company on the internet over a year ago when I was looking for something to create a round effect at the top of my dormer windows (I talked about that problem in my post 2nd Floor Windows Finally Complete, Sort Of). I sent him a similar picture and he sent me a link to the products they carry. The closes I could find in the width I needed was the Ekena Millwork PB06X09X01DI 6 1/4-Inch W x 9 3/4-Inch H x 1-Inch P Diane Plinth Block, which I found cheaper on Amazon.

The problem with this plinth, is it’s thinner than the original wood piece. It’s longer too, but I can cut away the access length when I cut the needed angle. This plinth is also a little more decorative than the original. I’ve already worked through my mind how to solve the thickness issue, so stay tuned for a future post on that.

What I’m still wrestling with is how much of the ornateness to keep. Clearly I will cut away the majority of the bottom of the Diane plinth, but I could also cut off layers from the top. I’m leaning towards option 2, which means I’ll have a opening at the top of this plinth. I’m thinking that shouldn’t be an issue as the opening shouldn’t be exposed as this piece is resting under the pilaster and I could use caulk to fill the space. I’d love your thoughts as I plan to finish the headboard project before jumping into this. Also I’ve only ordered two of these plinths, since I’m pulling another of my famed MacGyver tricks to deal with the thickness issue. I’ll order the other 6 if it works. If anyone knows of a thicker product, other than a custom milled piece, let me know.

3 Comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s