Well this most certainly will be a Memorial Day weekend we all will remember. No BBQs for me even though I have my prized grill with me again. I just didn’t feel like firing it up for a solo meal. Instead I decided to tackle the metal flashing that goes around my house. About a month ago I tested scrapping an area to the left of my back door. I used my paint scraper with a carbon graphite blade and a heat gun for about an hour to get that area cleaned. I thought I’d tackle a small area each evening, but then the sheshed project got all my attention. Good thing as my favorite Jack of all trades, Tom Milfeld, stopped by to see the project and he told me to use my sander with 60 grit paper to eat through the paint.

Left side of rear door, hand scrapped

Saturday I got started and I selected my belt sander to work with. I bought 50 grit belts and started on the right side of the door. It worked awesome, in the beginning. I got about 10 feet done before I needed to change the belt. I only bought one pack, which comes with two belts. The rain brought an end to the project, so I went to my computer with the intent of ordering more belts for in-store pickup, but an idea popped in mind to look at grinder accessory. The belt sander worked great on the vertical side, but not so great of the top near the house and I thought my grinder could get closer. I found exactly what I was looking for, a flap disk. At this point I have about 3 hours into this project and about 1/4 of the house complete.

Sunday, with more rain in the forecast, I turned my focus on my yard. Last year I seeded the right side and what I call nappy grass took over. It died out over the winter and my first lawn treatment of the seaosn should insure it doesn’t come back, but I had a lot of bare patches. There is a family flipping a house across the street from me and the husband is a landscaper. He stopped by and gave me some great ideas. I want to plant one tree and I’ve been considering a River Birch (grew up with that at my old house), a Star Magnolia (ode to Fixer Upper), or a Canadian Clump Cherry (also planted at my old house). He suggested an Eastern Redbud and recommended Bzak Nursery, so I decided to go out there for bags of top soil, seed for the lawn, and to see in person all the plants he recommended. They had everything, but the Redbud. Rhonda, who works with DIYers tweaked his suggestions a bit, so I can’t wait to turn my attention fully on the flower beds. I got the top soil and seed down and half the yard cut just as the rains started to fall.

I really didn’t want to deal with a big box store, so Monday morning I called the Ace Hardware in Clifton to see if they had my sander belt size, they did so I bought 32 and 40 grit. I wanted to get more paper in case the flap disc didn’t work of if they didn’t carry it. They did, so I bought two 36 grit GatorBlades. On a scale of 1 to 10, hand scrapping was a one, belt sander a five, grinder with the flap disc TEN!

The only drawback was I’d blow through a battery about ever 6′. I have three batteries, a rapid and regular charger. I was burning through batteries faster than they could charge, so I stopped to finish cutting the grass and to throw down a couple more bags of top soil I also bought at Ace and more seed. I got from the blue section of the back, all of Stock Ave side, and the left side of the front sanded. Skies turned black and wind picked up, so I thought rain was coming again. I stopped and ate lunch while watching another episode of a new Netflix series I’ve gotten hooked on, Blood & Water. I also read the can of Sherwin William’s All Surface Latex Enamel Primer I bought to apply to the metal once all the paint and rust was removed. It stated that bare steel must be primed the same day. I noticed that some areas I had scrapped the day before had rusted again with the rain, so I re-sanded that area and decided to apply the primer to all the areas I had already scraped.

What a difference it makes. I wanted the primer to be tinted to Sea Serpent, but that couldn’t happen because the base is white. This color is 50% of that.

Before calling it a day and weekend I decided to try the GatorBlade on my prized stain glass window frame. Regardless as to who I select to paint the house, I’m handling the stripping of that window. The disc is getting pretty worn, so I thought it would do less damage on wood and I was right. I’ll probably put the new one on to complete the metal flashing stripping, but I’ll use the worn one to finish the window.

4 Comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s