After getting all the crown moulding on the front cleared of paint and ready for Joe and crew, I finally turned my focus on the porch ceiling bead board. Thanks to working on other projects for Mike Tanner, Joe is very familiar with painting my type of columns, so it is very important for me to get this project done before he starts working on the front of the house. His plan is to paint fully the Stock Street side, followed by my neighbor’s side. These areas call for his tallest ladders and will be the most difficult to paint. If I’m finished with my project he’ll paint the front next, saving the rear for last.

I had received the sample pints from Alan Bensen, National Account Sales Manager Dumond Chemicals, Inc., but I started with what I had left from the crown moulding. Alan sent me an email with reminder tips from our phone call. Somehow I forgot reminder one and paid the price for it.

  1. Apply Peel Away 1 like you are icing a birthday cake, and you like icing! 😊  
  2. Don’t let it sit too long or else it may dry out (24 hours max).  It may even work overnight (apply at 5-6pm at night), remove before noon the next day….it’s trial and error.
  3. When removing, use water, nylon scrub brush, and/or scotch- bright pad to remove. Don’t be afraid to use the garden hose!  Water and elbow grease working together does the trick.

When this product dries out on your surface it does not scrub off. I had to use my pressure washer and unfortunately in spots I furred up the soft pine boards. On the phone he had told me, based on the pictures I sent that the product wouldn’t need to sit for more than a couple of hours. It was drying so fast that for the third section I only let it sit for an hour. Applying it liberally is truly the key. The paint that was in the groves, especially around the edges was my primary concern. The re-treatment with the Peel A-Way did nothing around the edges; about 60% came out of the grooves thanks to the 20200813_081636pressure washer. The very thing I was trying to avoid, using my heat gun with a metal pick, is exactly what I ended up doing. The white along the edges I think was caulk and not paint because it was really gummy once hit with the heat gun. I burned the wood in some places. That didn’t concern me much as once I discovered I had furred up the wood in some areas I knew I’d need to sand the surface. The burns weren’t deep, so most would go away with the sanding.  I started with 80 grit, followed by 120.  I may go a step further before applying the oil.

I did the ceiling in three sections over the course of two days. My arms were so tired, as all the work was above my head with extended arms. I still love Peel A-Way and would highly recommend it, but given how much manual removal I ended up doing I could have eliminated the need to use the pressure washer and sanding if I had just started with my heat gun and pick.

Ceiling Before Peel A-Way

Amazing what the right product and elbow grease can accomplish. After doing some Internet searching I have decided to use Penofin Ultra Premium Red Label Pentrating Oil. I’ll let the Peel A-Way neutralizing agent set for a day before starting the Penofin prep processes. If all goes well I should be finished with my outdoor projects by the end of the weekend.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s